Skip to main content


The Green Proving Ground program has commissioned Department of Energy National Laboratories to perform real-world measurement and verification of the following technologies in pilot installations in federally-owned buildings. Preliminary technology assessments are available below as PDFs.


Preliminary Technology Assessments

In the News: From the 2014 Program Lineup

LED Replacement Lamp for CFLs > This “plug-and-play” replacement for CFLs commonly used in commercial downlights is estimated to achieve up to 50% savings in energy consumption with minimal installation cost. Findings available in 2016.

LED Retrofit for Fluorescent Luminaires > Two models of LED retrofit kits for T8 and T12 fluorescent lamps will be evaluated for their ability to save lighting energy without alterations to the existing ceiling grid. Findings available in 2016.

Networked Lighting > This innovative lighting system enables two-way communication between LED luminaires, sensors and back-end software to dynamically achieve both energy savings and operational improvement. Findings available in 2016.


LED Lighting with Integrated Controls > This lighting technology integrates the LED lamp, driver, daylight controls, and occupancy sensors into a single fixture for easy one-for-one replacement of the existing luminaires. Auto-calibration of daylight sensors and use of a handheld remote to group fixtures promises to overcome a key hurdle to realizing lighting energy and cost savings: the effective integration and commissioning of controls. The luminaire builds on the inherently dimmable nature of LED lighting by integrating occupancy and daylighting controls directly into the fixture and its driver. Findings available in 2015.



The Green Proving Ground program leverages GSA’s real estate portfolio to evaluate innovative sustainable building technologies.



Green Proving Ground

GPG, GPG Technologies, Green Proving Ground, Lighting