Photovoltaic-Thermal Hybrid Solar System

Photovoltaic-thermal (PV-T) hybrid solar systems offer increased electricity production by cooling the PV panel, and using the removed thermal energy to heat water - all in the same footprint as a standard PV system. GPG’s assessment of the nation’s first large-scale PV-T system installed at the Thomas P. O’Neill, Jr. Federal Building in Boston, MA, provided numerous lessons learned in system design, and identified a target market of locations with high utility costs and electric hot water backup. View full-size infographic. [PDF - 238 KB]

GPG Findings 016, January 2015, PHOTOVOLTAIC-THERMAL HYBRID SOLAR SYSTEM. Opportunity: What are therenewable energy goals of federal mandates? 7.5% OF ELECTRICTY GENERATED BY RENEWABLES.30% OF HOT WATER HEATED WITH SOLAR. Technology: What is the advantage of PV-T? INCREASES PV PANEL EFFICIENCY BY LOWERING PV TEMPERATURE CAPTURES HEAT FOR OTHER USES SUCH AS DOMESTIC HOT WATER. Measurement and Verification: Where did M and V occur? NATIONAL RENEWABLE ENERGY LABORATORY measured performance of   a PV-T system installed at the O’Neill Federal Building in Boston, Massachusetts. Results:How did PV-Tperform in M&V? 1st LARGE-SCALE INSTALLATION; NUMEROUS LESSONS LEARNED. LIMITED COST-EFFECTIVE DEPLOYMENT POTENTIAL COMPETITIVE WITH TRADITIONAL SOLAR WHEN 30-50% LESS EXPENSIVE.Cost-effective when electricity rates are high. Deployment: Where does M&V recommend deploying PV-T? HIGH ELECTRIC RATES.Small facilities, with electric rates > $.30 k/Wh, in hot climates with large domestic hot water (DHW) loads and limited roof space. Incentives can lower system costs by as much as 75% [PDF - 238 KB]


Reference above to any specific commercial product, process or service does not constitute or imply its endorsement, recommendation or favoring by the United States Government or any agency thereof.

print Share Icon Last Reviewed: 2018-08-08