American Society for Testing and Materials (ASTM)

ASTM Standards are available from:

American Society for Testing and Materials (a nongovernment website)
100 Barr Harbor Drive
P.O. Box C700
West Conshohocken, PA 19428-2959
(610) 832-9585

ASTM Standards
Number Title
ASTM C-423 Standard Test for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM D-297 Standard Test Methods for Rubber Products - Chemical Analysis
ASTM D-418 Standard Methods of Testing Pile Yarn Floor Covering Construction
ASTM D-629 Standard Test Methods for Quantitative Analysis of Textiles
ASTM D-861 Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns
ASTM D-1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
ASTM D-1423 Standard Test Method for Twist in Yarns by Direct Counting
ASTM D-1667 Standard Specification for Flexible Cellular Materials Poly (Vinyl Chloride) Foam (Closed-Cell)
ASTM D-2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
ASTM D-3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed Cup Apparatus
ASTM D-3574 Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams
ASTM D-3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
ASTM D-3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
ASTM D-5848 Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings
ASTM E-84 Test Method for Surface Burning Characteristics of Building Materials.
ASTM E-90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E-413 Classification for Rating Sound Insulation
ASTM E-648 Standard Test Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source
ASTM E-662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM F-1427 Standard Consumer Safety Specification for Bunk Beds
Last Reviewed 2016-03-17