Selected Reading on Hardware

Procedure code:

870001R

Source:

Preservation Technology Source Book

Division:

Doors and Windows

Section:

Hardware

Last Modified:

08/12/2016

This standard includes a listing of some known sources that may be referenced for additional information on specific issues relating to this subject.

Articles/Papers

• Cotton, J. Randall. "Knobs & Latches." The Old-House Journal, November/December 1987, pp. 37-43.
• Ridout, Andrea. "Code-Compliant Traditional Hardware." Traditional Building, January/February 1994, Vol 7, No. 1, pp. 38-44.
• Technical Staff, TB. "Bedecking Doors: Where to Hobknob with the Past." Traditional Building, May/June 1994, Vol. 7, No. 3, pp. 48-57.
• ________. "Hardware That Fits." Traditional Building, September/October 1993, Vol 6, No. 5, pp. 35-41.
• ________. "Hardware Sourecs to Latch Onto." Traditional Building, March/April 1992, Vol 5, No. 2, pp. 44-50.

Books

• Belle, John, John R. Hoke, and Stephen A. Kliment, eds.Traditional Details for Building Restoration, Renovation, and Rehabilitation; From the 1932-1951 Editions of "Architectural Graphic Standards". New York: John Wiley & Sons, Inc., 1991.

Other References

• Bleekman, III, George M., et. al. "Twentieth Century Building Materials: 1900-1950: An Annotated Bibliography." Washington, D.C.: Preservation Assistance Division, National Park Service, U.S. Department of the Interior; and, Murfreesboro, TN: Middle Tennessee State University, 1993.