Repairing Broken Tiles
- Procedure code:
- Ohj - March/April 1991
- Ceramic Tile
- Last Modified:
A. This procedure includes guidance on using epoxy to repair broken tiles that are cracked or split cleanly through the tile. SURFACE CRAZING OR SMALL SURFACE FLAWS IN THE GLAZE DO NOT NEED REPAIRING.
B. Repair is preferable to replacement if the break is clean because the removal of even one tile runs the risk of causing damage to adjacent tiles.
A. Patching Resin: Manufacturers' standard 2-component epoxy resin, designed specifically for patching of ceramic tile materials.
- Tint to match color of existing tile following manufacturers' recommendations.
B. Enamel to match color of tile.
C. Clean, potable water.
A. Stiff bristle brush
B. Caulking gun
C. Re-pointing tools (such as a hacksaw blade, chisel, and steel trowel
3.01 ERECTION, INSTALLATION, APPLICATION
A. Clean out the crack of any loose dust and debris using a stiff bristle brush or by blowing air into the crack.
B. Blend the resin materials to match the color matrix, adding pigment as required.
C. Following manufacturer's instructions, force mixed resin into the void using re-pointing tools or a caulking gun, making sure it is pressured into the crack as deep as possible. Fill until flush with the surface. Sometimes, the supplier will instruct using a primer for their materials.
D. Touch-up repaired surface with enamel to match color of tile.
E. Do not extend patch material into the grout or mortar joint. Crack repairs should be limited to individual tiles.