Replacing Broken, Missing Or Non-Original Glass With New Leaded Glass Panels

Technical Procedures Disclaimer

Prior to inclusion in GSA’s library of procedures, documents are reviewed by one or more qualified preservation specialists for general consistency with the Secretary of Interior Standards for rehabilitating historic buildings as understood at the time the procedure is added to the library. All specifications require project-specific editing and professional judgement regarding the applicability of a procedure to a particular building, project or location. References to products and suppliers are to serve as a general guideline and do not constitute a federal endorsement or determination that a product or method is the best or most current alternative, remains available, or is compliant with current environmental regulations and safety standards. The library of procedures is intended to serve as a resource, not a substitute, for specification development by a qualified preservation professional.

Rewrite

We’ve reviewed these procedures for general consistency with federal standards for rehabilitating historic buildings and provide them only as a reference. Specifications should only be applied under the guidance of a qualified preservation professional who can assess the applicability of a procedure to a particular building, project or location. References to products and suppliers serve as general guidelines and do not constitute a federal endorsement nor a determination that a product or method is the best alternative or compliant with current environmental regulations and safety standards.


REPLACING BROKEN, MISSING OR NON-ORIGINAL GLASS WITH NEW LEADED
GLASS PANELS


PART 1---GENERAL

1.01 SUMMARY

A. This procedure includes guidance on replacing broken or
missing glass with new leaded glass to match existing.

B. See 01100-07-S for general project guidelines to be
reviewed along with this procedure. These guidelines
cover the following sections:

1. Safety Precautions

2. Historic Structures Precautions

3. Submittals

4. Quality Assurance

5. Delivery, Storage and Handling

6. Project/Site Conditions

7. Sequencing and Scheduling

8. General Protection (Surface and Surrounding)

These guidelines should be reviewed prior to performing
this procedure and should be followed, when applicable,
along with recommendations from the Regional Historic
Preservation Officer (RHPO).

1.02 SUBMITTALS

A. Product Data: Submit manufacturer's technical data for
each product indicated including recommendations for
their application and use. Include test reports and
certifications substantiating that products comply with
requirements.

B. Restoration Program: Submit written program for each
phase of restoration process including protection of
surrounding materials on building and site during
operations. Describe in detail materials, methods and
equipment to be used for each phase of restoration work.

C. Samples: Submit for verification purposes, prior to mock-
up erection, samples of the following:

1. Each type of replacement glass.

2. Each type of lead came.

1.03 QUALITY ASSURANCE

A. Field Samples: Prior to start of leaded glass restoration
work, prepare the following sample panels in building
where directed by RHPO. Obtain RHPO's acceptance of
visual qualities before proceeding with the work. Retain
acceptable panels in undisturbed condition, suitably
marked, during construction as a standard for judging
completed work.

1. Cleaning: Demonstrate materials and methods to be
used for cleaning on sample panel of approximately
4 (four) sq. Ft. in area.

2. New Leaded Glass Panels: Prepare sample panel to
demonstrate quality of materials and workmanship
for each type of new leaded glass panel work.

1.04 DELIVERY, STORAGE AND HANDLING

A. Packing and Shipping: Protect materials during transit,
delivery, storage and handling to prevent damage, soiling
and deterioration.


PART 2---PRODUCTS

2.01 MATERIALS

A. Glass: Provide new glass to match opacity, color,
thickness, texture, pattern and other aesthetic
characteristics of existing glass.

B. Putty: Standard putty manufactured specifically for
leaded glass work.

C. Braces and Other Accessories: Provide new to match
existing.

D. Cleaner: Manufacturer's standard ammonia-base cleaning
solution specifically designed for cleaning of leaded
glass surfaces.

E. Water for Cleaning: Clean, potable, free of oils, acids,
alkalis, salts and organic matter.

F. Clean, soft cloths

2.02 EQUIPMENT

A. Stiff bristle brush

B. Vacuum


PART 3---EXECUTION

3.01 ERECTION, INSTALLATION, APPLICATION

A. Replacing Broken, Missing or Non-Original Glass:

1. Prior to replacing broken or missing glass, provide
braces and temporary support as required to protect
leaded glass work from deflection or other kind of
damage.

2. Pry up edges of lead came around location of new
piece of glass.

3. Remove any fragments of broken glass or any other
material in channel of lead came that would affect
installation of new piece.

4. Cut new piece of replacement glass and install in
location using putty in channels to hold new glass
tightly in place.

5. Press lead cames down to flat position and repair
any broken or damaged solder joints. See 08822-01-
R for guidance.

B. Cleaning:

1. Clean all leaded glass surfaces.

2. Vacuum or brush loose dirt and dust from surfaces
of glass.

3. Wash both sides of glass using a clean cloth and
cleaner.

4. Rinse both surfaces thoroughly using a clean cloth
and clean water to completely remove dirt and
cleaner residue. Change rinse water frequently.

5. Repeat process as required to produce effect
established by mock-up.

6. Wipe the surface with a dry clean cloth to prevent
streaking.

3.02 ADJUSTING/CLEANING

A. Protect leaded glass from damage during construction
operation.

B. At completion of project, remove any protective coverings
and reclean any soiled surfaces using procedures and
materials described herein.