Periodic Maintenance Of Wood Veneer Paneling
- CSI Division:
- Division 3 - Concrete
- Architectural Woodwork
- Last Modified:
Technical Procedures Disclaimer
Prior to inclusion in GSA’s library of procedures, documents are reviewed by one or more qualified preservation specialists for general consistency with the Secretary of Interior Standards for rehabilitating historic buildings as understood at the time the procedure is added to the library. All specifications require project-specific editing and professional judgement regarding the applicability of a procedure to a particular building, project or location. References to products and suppliers are to serve as a general guideline and do not constitute a federal endorsement or determination that a product or method is the best or most current alternative, remains available, or is compliant with current environmental regulations and safety standards. The library of procedures is intended to serve as a resource, not a substitute, for specification development by a qualified preservation professional.
We’ve reviewed these procedures for general consistency with federal standards for rehabilitating historic buildings and provide them only as a reference. Specifications should only be applied under the guidance of a qualified preservation professional who can assess the applicability of a procedure to a particular building, project or location. References to products and suppliers serve as general guidelines and do not constitute a federal endorsement nor a determination that a product or method is the best alternative or compliant with current environmental regulations and safety standards.
- This procedure includes guidance on the periodic cleaning of wood paneling with a non-ionic detergent to remove surface dirt and oils. This procedure may be used prior to refinishing work. For guidance on refinishing interior wood, see 06400-10-R.
- Non-Ionic Detergent: Concentrate, silicate buffered, non-ionic, rinseless-type synthetic detergent, containing no soaps, free alkali, solvents, abrasives, acids, caustics and other deleterious materials, do websearch for product information, some non-ionic detergents for use on wood include: Triton X-100 or Orvus paste or approved equal; follow manufacturer's guidance in use of products.
- Cloths: Soft, clean, and lint free
- Clean, potable water
- Protection: All surfaces adjacent to wood being cleaned shall be protected during cleaning and the surface restoration process. All damaged items shall be corrected by the Contractor at no expense to the Government.
- Surface Preparation: Test wash an inconspicuous area of wood to verify that method and materials have no adverse effect on existing finish.
3.02 ERECTION, INSTALLATION, APPLICATION
- Dilute non-ionic detergent with water using proportions as directed by manufacturer.
- Damp wipe with sponge. Do not saturate wood.
- Wipe dry with a clean dry cloth, rubbing in direction of grain.