Selected Reading On Metal Materials

Procedure code:
501007R
Source:
Preservation Technology Source Book
Division:
Metals
Section:
Metal Materials
Last Modified:
08/12/2016

Technical Procedures Disclaimer
Prior to inclusion in GSA’s library of procedures, documents are reviewed by one or more qualified preservation specialists for general consistency with the Secretary of Interior Standards for rehabilitating historic buildings as understood at the time the procedure is added to the library. All specifications require project-specific editing and professional judgement regarding the applicability of a procedure to a particular building, project or location. References to products and suppliers are to serve as a general guideline and do not constitute a federal endorsement or determination that a product or method is the best or most current alternative, remains available, or is compliant with current environmental regulations and safety standards. The library of procedures is intended to serve as a resource, not a substitute, for specification development by a qualified preservation professional.

Rewrite
We’ve reviewed these procedures for general consistency with federal standards for rehabilitating historic buildings and provide them only as a reference. Specifications should only be applied under the guidance of a qualified preservation professional who can assess the applicability of a procedure to a particular building, project or location. References to products and suppliers serve as general guidelines and do not constitute a federal endorsement nor a determination that a product or method is the best alternative or compliant with current environmental regulations and safety standards.


This standard includes a listing of some known sources that may be referenced for additional information on specific issues relating to this subject.

Articles/Papers

  • "Galvanic Corrosion (Electrolysis) Potential Between Common Flashing Materials and Selected Construction Materials." From Ramsey/Sleeper, Architectural Graphic Standards. 8th. Ed. New York: John Wiley & Sons, 1988. p. 360.
  • Gayle, Margot. "Cast Iron Architecture, USA." Historic Preservation, January-March 1975, No. 1, ppl 14-19.
  • Grimmer, Anne E. "Dangers of Abrasive Cleaning to Historic Buildings." Preservation Briefs #6. Washington, D.C.: U.S. Department of the Interior, 1979.
  • Lins, Andrew. "Sculptural Monuments in an Outdoor Environment". Andrew Lins is Conservator for Sculpture and Decorative Arts at the Philadelphia Museum of Art.
  • Sweetser, Sarah M. "Roofing for Historic Buildings." Preservation Briefs #4. Washington, D.C.: U.S. Department of the Interior, n.d.
  • Technical Staff, OHJ. "Maintaining and Repairing Architectural Iron." The Old-House Journal, January/February 1990, pp. 22-27.
  • Waite, John G. "The Maintenance and Repair of Architectural Cast Iron." Preservation Briefs #27. Washington, D.C.: U.S. Department of the Interior, 1979.

Books

  • Ashurst, John & Nicola. Practical Building Conservation. Vol. 4: Metals. New York: Halsted Press, 1988, rev. 1992.
  • Belle, John, John R. Hoke, and Stephen A. Kliment, eds. Traditional Details for Building Restoration, Renovation, and Rehabilitation; From the 1932-1951 Editions of "Architectural Graphic Standards". New York: John Wiley & Sons, Inc., 1991.
  • Gayle, Margot, David W. Look, and John G. Waite. Metals in America's Historic Buildings. Washington, D.C.: U.S. Department of the Interior, 1980.
  • Weaver, Martin E., with F. G. Matero. Conserving Buildings: Guide to Techniques and Materials. New York: John Wiley & Sons, Inc., 1993.

Other References

  • Bleekman, III, George M., et. al. "Twentieth Century Building Materials: 1900-1950: An Annotated Bibliography." Washington, D.C.: Preservation Assistance Division, National Park Service, U.S. Department of the Interior; and, Murfreesboro, TN: Middle Tennessee StateUniversity, 1993.
Last Reviewed: 2017-08-13