Selected Reading On General Electrical Requirements
- Procedure code:
- Preservation Technology Source Book
- Basic Electrical Requirements
- Last Modified:
Technical Procedures Disclaimer
Prior to inclusion in GSA’s library of procedures, documents are reviewed by one or more qualified preservation specialists for general consistency with the Secretary of Interior Standards for rehabilitating historic buildings as understood at the time the procedure is added to the library. All specifications require project-specific editing and professional judgement regarding the applicability of a procedure to a particular building, project or location. References to products and suppliers are to serve as a general guideline and do not constitute a federal endorsement or determination that a product or method is the best or most current alternative, remains available, or is compliant with current environmental regulations and safety standards. The library of procedures is intended to serve as a resource, not a substitute, for specification development by a qualified preservation professional.
We’ve reviewed these procedures for general consistency with federal standards for rehabilitating historic buildings and provide them only as a reference. Specifications should only be applied under the guidance of a qualified preservation professional who can assess the applicability of a procedure to a particular building, project or location. References to products and suppliers serve as general guidelines and do not constitute a federal endorsement nor a determination that a product or method is the best alternative or compliant with current environmental regulations and safety standards.
This standard includes a listing of some known sources that may be referenced for additional information on specific issues relating to this subject.
- Baird, Robert A. "Specifying Custom Lighting: A Manufacturer's Point of View." Tradition Building, November/December 1993, Vol. 6, No. 6, pp. 75-90.
- Kay, Gersil N. "Mechanical/Electrical Systems in Older Buildings." APT Bulletin, Vol. XXI No. 3/4, 1989, pp. 5- 7.
- Belle, John, John R. Hoke, and Stephen A. Kliment, eds. Traditional Details for Building Restoration, Renovation, and Rehabilitation; From the 1932-1951 Editions of "Architectural Graphic Standards". New York: John Wiley & Sons, Inc., 1991.
- Kay, Gersil Newmark. Mechanical and Electrical Systems for Historic Buildings. New York: McGraw-Hill, Inc., 1992.