Submeters and Analytics: Wireless CTs

Integrated sensors and analytics are simplifying submetering and driving costs down. Wireless CT sensors clip onto circuit-panel electric wires and draw power from them. Researchers from the National Renewable Energy Laboratory (NREL) found that the technology was easy to install and is a good option for fault detection and diagnostics. View full-size infographic. [PDF - 388 KB]

GPG Findings 003, September 2012, Advanced Power Strips for Plug Load Control. Opportunity: How much energy is lost to plug loads in U.S. commercial buildings? 25% of electricity is lost to phantom power. In efficient buildings this can increase to 50%. Technology: How do Advanced Power Strips save energy? De-energize circuits based on a timer, load-sensing, or both. Measurement and Verification: Where did M and V occur? National Renewable Energy Laboratory tested the effectiveness of 3 plug load reduction strategies in buildings throughout GSA’s Mid-Atlantic Region. Results: How did Advanced Power Strips perform in M and V? Simple timer controls most cost-effective.26% energy savings at workstations with advanced computer management in place. 48% in kitchens and printer rooms. Less than 8 years payback in all applications. Less than 1 year in kitchens and printer rooms. Deployment: Where does M and V recommend deploying Advanced Power Strips? Deploy broadly. Energy savings and low payback support deployment throughout GSA’s portfolio. [PDF - 388 KB]


Reference above to any specific commercial product, process or service does not constitute or imply its endorsement, recommendation or favoring by the United States Government or any agency thereof.

print Share Icon Last Reviewed: 2019-08-20